Brother iPrint&Scan MFC-8950DW - Manual (Page 28)

Chapter 3
22
Canceling a Broadcast in progress
3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Stop/Exit.
b
Do one of the following:
 To cancel the entire broadcast, press
Entire Broadcast
. Go to step c.
 To cancel the current job, press the
button that displays the number
being dialed. Go to step d.
 To exit without canceling, press
Stop/Exit.
c
When the LCD asks if you want to
cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without canceling, press No
or Stop/Exit.
d
Do one of the following:
 To cancel the current job, press Yes.
 To exit without canceling, press No
or Stop/Exit.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
Note
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if
Real Time TX is set to Off). If the memory
is full, faxes from the scanner glass cannot
be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
a
Press Fax.
b
Load your document.
c
Press d or c to display Real Time TX.
Press Real Time TX.
d
Press On.