Brother iPrint&Scan MFC-8950DW - Manual (Page 85)

Options
79
B
Optional paper tray
(LT-5400)
B
An optional lower tray can be installed on the
MFC-8950DW
1
, and it can hold up to 500
sheets of 20 lb (80 g/m
2
) paper.
When an optional tray is installed, the
machine can hold up to 1050 sheets of plain
paper.
For setup, see the Instructions that we have
supplied with the lower tray unit.
1
Tray 2 is standard on MFC-8950DWT.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
Memory board
B
MFC-8950DW(T) has 128 MB of standard
memory. The machine has one slot for
optional memory expansion. You can
increase the memory up to maximum of
384 MB by installing one SO-DIMM (Small
Outline Dual In-line Memory Module).
SO-DIMM Types
B
For information regarding memory for your
Brother machine please visit us at:
http://www.brother-usa.com/support/
memory/.
In general, the SO-DIMM must have the
following specifications:
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
Customer Service.
Type 144-pin and 16-bit output
CAS latency 4
Clock
frequency 267 MHz (533 Mb/S/Pin) or
more
Capacity 256 MB
Height 1.18 in. (30.0 mm)
DRAM type DDR2 SDRAM