Wolo HWK-1 Air Horn Wiring Kit - Manual (Page 2)

10. Secure the horn button switch to the mounting location using the self-
tapping screws provided. See Fig #3.
11. RED WIRE with inline fuse: Is connected to POSITIVE (+) 12-volts
such as the battery, alternator and etc. See Fig #5.
12. RED WIRE without inline fuse: Is connected to the compressor terminal
marked positive or (+). Cut the red wire to length and strip back the
plastic insulation so that 1/4” of wire is exposed. Insert the wire into the
1/4” female push-on terminal and crimp terminal. Make sure that the wire
is securely held in the terminal by lightly pulling on the wire while holding the terminal. Connect the terminal to
compressor’s (+) male terminal. See
Fig. #5
13. BLACK WIRE: Is connected to the
compressors (-) terminal and the
other end of the wire will be
connected to ground, such as the
negative (-) battery post or any clean
metal body bolt. Cut the black wire
to length and strip back the plastic
insulation so that 1/4” of wire is
exposed. Insert the wire into the
spade terminal and crimp terminal.
Make sure that the wire is securely
held in the terminal by lightly
pulling on the wire while holding the
terminal. Connect the terminal to (-) ground. NOTE: IMPORTANT: Make sure any paint or rust is cleaned from bolt
and metal surface that will be in contact with the terminal. (Sheet metal screw provided if needed.) See Fig. #5
14. Secure all wires using the plastic wire ties provided to ensure that no wire touches the engine, exhaust manifold or any
moving engine parts. Installation is complete.
Fig. 4
Fig. 5
Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date of purchase,
that this product is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at its option, will
either repair or replace the item free of charge, if it is returned to Wolo within three months from the date of purchase
together with proof of purchase as described below. Wolo reserves the right to inspect any defect prior to settling any
warranty claim by repair or replacement. This warranty is limited as above provided and Wolo will not be responsible for
fire or other casualty or accident, due to neglect, abuse, abnormal use, modifications, faulty installation of this product, or
natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF
THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON
FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR
OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. Provide
with the return a brief description of the problem. Also, include with the return a check or money order in the amount of $10.00 to
cover return shipping. Mail to:
Wolo Manufacturing Corp.
One Saxwood Street, Deer Park, NY 11729
Attn: Warranty Service E-mail: [email protected]
© 2010 Wolo Mfg. Corp
All Rights Reserved.
12” Gray
Wire
12” GrayWire
GrayWire