Wood’s Powr-Grip MRTARC8HV11DC - Manual (Page 3)

Rev 1.0/11-11 1 CF5LEAO: #35174AFT
SPECIFICATIONS
Model Number: CF5LEAO
Description: Long Extension Arms provide a larger Pad Spread to reduce overhang on
loads.
Weight Increase: 10 lbs [5 kg] when Long Extension Arms are installed.
Note: Make sure to add the weight of all options to the Lifter Weight
when you are selecting appropriate hoisting equipment (see ASSEMBLY
in lifter's instruction manual).
Lifter Model: MRT411LDCO MRTALP611LDCO MRTA811LDC/ACO
Adjusted Max Pad Spread:
1 (to outer edges)
Rectangular Configuration: 59¼" x 86½" 63¾" x 111½" 80¼" x 126½"
[1506 x 2200 mm] 1620 x 2833 mm] [2038 x 3212 mm]
Linear Configuration: 15¾" x 100¼" 17" x 124" 13¾" x 145¼"
[398 x 2547 mm] [430 x 3152 mm] [352 x 3688 mm]
Adjusted Max Load Capacity: (when any pad is installed in outermost position on Long Extension Arm)
500 lbs [225 kg] 750 lbs [340 kg] 1000 lbs [455 kg]
WARNINGS
Powr-Grip is pleased to offer the most reliable materials handling products
available. Despite the high degree of security provided by the Long Extension
Arms, certain precautions must be observed to protect the user and others.
Always wear personal protective equipment that is appropriate for the material being handled.
Follow trade association guidelines.
Always use the Long Extension Arms under conditions approved for the design of the vacuum
lifter (see lifter's instruction manual).
Never use Long Extension Arms that are damaged, malfunctioning, or missing parts.
Never remove or obscure warning labels on the Long Extension Arms.
Never use Long Extension Arms if the Load Capacity or any warning appears to be missing or
obscured.
Never exceed the Load Capacity (see SPECIFICATIONS and OPERATION) or attempt to lift loads
the lifter is not designed for (see lifter's instruction manual).
Always remember that modifications to Long Extension Arms may compromise your safety.
Wood's Powr-Grip cannot be responsible for products that have been modified by the
customer. For consultation, contact Wood's Powr-Grip.
1
Pad Spreads are shown for lifters equipped with 11" [28 cm], lipped vacuum pads (model G3370). For 10" [25 cm], lipped
pads (model HV11), subtract 1¾" [48 mm] from each dimension listed. For 9" [23 cm] pads (model VPFS9), subtract 2¾" [73
mm] from each dimension listed.