Wood’s Powr-Grip MRT49DC2 - Manual (Page 12)

Rev 0.5/4-14 10 MRT4-DC2: #35071
T
O
C
HANGE THE
P
AD
F
RAME
C
ONFIGURATION
Three pad frame configurations accommodate different load dimensions (see SPECIFICATIONS:
Maximum Pad Spread). Configurations are created by installing or removing the extension arms
and by repositioning the movable pad mounts (see To Install/Remove Extension Arms and
Reposition Vacuum Pads to follow):
1) Select a configuration to provide optimal support across the load surface and to minimize load
overhang.
2) Assemble the pad frame in a symmetrical configuration, to keep the lifter balanced.
Make sure all vacuum hoses are positioned to avoid damage during lifter
operation.
3) Make sure all vacuum hoses are secure and routed to avoid being pinched, snagged, abraded
or otherwise damaged during lifter operation.