Wood’s Powr-Grip MRTA611LDC2 - Manual (Page 15)

Rev 0.0/4-14 13 MRTA6-DC2: #35072
To remove extension arms, reverse the previous procedure. To remove a vacuum pad,
disconnect the corresponding vacuum hose and remove the movable pad mount as previously
directed. Store removed components in a clean, dry location to protect them from environmental
exposure.
About Secondary Rotation Stops
Rotation stops are used to secure the load at each quarter turn, as desired. Secondary stops,
located 30° from the primary stops, provide the same positioning when using a linear
configuration of the pad frame (see preceding illustrations).