Wood’s Powr-Grip CF15CEO - Manual (Page 4)

Rev 0.0/11-11 2 CF-CEO: #35186AFT
4
An MRTALP-DC lifter equipped with an Extension Kit (with or without Rocker Arms) can be used to handle loads positioned on
inclines up to a 4/12 pitch.
5
For loads with thicknesses greater than those listed, please contact Wood's Powr-Grip for help in determining the maximum
load capacity of the lifter.
Model Numbers: CF14CEO and CF15CEO
Descriptions: When a Pad Frame Extension Kit (CF14CEO) is employed on an MRTALP-DC
vacuum lifter, this option enables it to install composite roof panels or to handle
other long load materials in the flat orientation.
4
When Pad Frame Rocker Arms (CF15CEO) are also employed on an MRTALP-DC
vacuum lifter, this option enables it to handle loads in the flat orientation with
increased weight and length. Note: This option requires an additional set of Pad
Frame T-Arm Assemblies.
MRTALP-DC Adjusted Maximum Pad Spread with...
...Options: Extension Kit (CF14CEO) Extension Kit (CF14CEO),
Rocker Arms (CF15CEO), plus
extra set of T-Arm Assemblies (CF13CEO)
& VPFS625 Pads: 37" x 324¾" [940 x 8251 mm] 37" x 392½" [940 x 9972 mm]
& HV11F Pads: 45" x 310¼" [1143 x 7883 mm] 45" x 378" [1143 x 9604 mm]
MRTALP-DC Adjusted Maximum Load Capacity: 5
600 lbs [270 kg] 1100 lbs [500 kg]
MRTALP-DC Weight Increase:
100 lbs [46 kg] 225 lbs [102 kg]
Note: Make sure to add the weight of all options to the lifter weight when you
are selecting appropriate hoisting equipment (see lifter's instruction manual).