Wood’s Powr-Grip MTCL6FS625DC - Manual (Page 7)

Rev 5.0/12-13 5 MTCL6FS625DC: #35078
OPERATING FEATURES
Note: Components featured in the following instructions for assembling, operating or
maintaining the vacuum lifter are underlined on their first appearance in each section.
Standard MTCL6FS625DC shown without pad frame extensions.
1 ADJUSTABLE LIFT POINT TUBE 9 ENCLOSURE LATCH 17 BATTERY GAUGE 25 APPLY/RELEASE SWITCH
2 LIFT BAR 10 VACUUM PAD 18 BATTERY TEST BUTTON 26 POWER SYSTEM ENCLOSURE, with:
3 TILT DAMPER 11 PAD MOUNT 19 POWER LIGHT VACUUM PUMP(S)
4 TILT CONTROL LEVER 12 CONTROL HANDLE 20 CHARGER CORD RECEPTACLE VACUUM SWITCHES
5 PAD FRAME 13 QUICK CONNECTORS 21 POWER SWITCH BATTERY
6 LIFT BAIL 14 TILT LATCH 22 CIRCUIT BREAKER BATTERY CHARGER
7 VACUUM LIFT LIGHT 15 VACUUM GAUGE 23 CONTROLS RECEPTACLE 27 MOVABLE CONTROL PENDANT
8 LOW VACUUM WARNING BUZZER 16 AIR FILTER 24 ENABLE RELEASE BUTTON PAD FRAME EXTENSIONS (not shown)