Wood’s Powr-Grip MTCL8FS10TDC - Manual (Page 7)

Rev 6.0/12-13 5 5 MTCL8HV11FDC: #35079
OPERATING FEATURES
Note: Components featured in the following instructions for assembling, operating or
maintaining the vacuum lifter are underlined on their first appearance in each section.
Standard MTCL8HV11FDC shown without pad frame extensions.
1 ADJUSTABLE LIFT POINT TUBE 9 ENCLOSURE LATCH 17 BATTERY GAUGE 24 POWER SYSTEM ENCLOSURE, with:
2 LIFT BAR 10 VACUM PAD 18 BATTERY TEST BUTTON VACUUM PUMPS
3 TILT DAMPER 11 PAD MOUNT 19 POWER LIGHT VACUUM SWITCHES
4 TILT CONTROL LEVER 12 CONTROL HANDLE 20 CHARGER CORD RECEPTACLE BATTERY
5 PAD FRAME 13 QUICK CONNECTORS 21 POWER SWITCH BATTERY CHARGER
6 LIFT BAIL 14 TILT LATCH 22 CIRCUIT BREAKER 25 MOVABLE CONTROL PENDANT, with:
7 VACUUM LIFT LIGHT 15 AIR FILTER 23 CONTROLS RECEPTACLE 26 ENABLE RELEASE BUTTON
8 LOW VACUUM WARNING BUZZER 16 VACUUM GAUGE 27 APPLY/RELEASE SWITCH
28 Socket for PAD FRAME EXTENSION