Wood’s Powr-Grip PT10FS10TDC - Manual (Page 5)

Rev 10.0/4-13 3 PT10HV11FDC: #35144
OPERATING FEATURES
Note: Components featured in the following instructions for assembling, operating or
maintaining the vacuum lifter are underlined on their first appearance in each section.
Standard PT10HV11FDC shown.
1 LIFT SHACKLE 8 POWER SWITCH 16 MOVABLE CONTROL PENDANT
2 VACUUM RESERVE TANK 9 BATTERY GAUGE 17 HOIST PENDANT BASKET
3 BATTERY CHARGER 10 BATTERY TEST BUTTON 18 AIR FILTER
4 TILT ACTUATOR 11 VACUUM PAD 19 PAD FRAME
5 Enclosure with VACUUM PUMP(S) 12 PAD SHUTOFF 20 VACUUM GAUGE
6 Enclosure with VACUUM SWITCH 13 CONTROL HANDLE 21 Enclosure with BATTERY
7 VACUUM LIFT LIGHT 14 TILT TOGGLE SWITCH 22 LIFT BAR
15 APPLY/RELEASE SWITCH