Wood’s Powr-Grip EL Series - Manual (Page 6)

Rev 0.2/12-12 4 ELWC, etc: #35003
The Eazi Lifter Lifting Kit option (ELFK), shown
at left, provides a method to connect Wood’s
Powr-Grip original N-series hand cups to the Eazi
Lifter to lift smooth, nonporous loads. Included
guide straps are used to control the load as it is
lifted into the building opening.
1 Quick Links
2 Lift Chain
3 Guide Straps
4 Attachment Clasp
5 Hand Cup
The Eazi Lifter Extension Kit option (ELEK), shown at right, extends
the maximum mounting height from 60" [152 cm] to 103" [262
cm] and includes a floor base plate to accommodate mounting on
the building floor.
1 Cotterless Hitch Pin
2 Extension Assembly
3 Floor Base Plate