Wood’s Powr-Grip STT1 - Manual (Page 9)

Rev 8.0/6-12 7 STT1: #35151
FIGURE 5: FINAL ASSEMBLY
7) Assembly the final assembly as shown in Figure 6:
1) 5/8-11 NYLON LOCK HEX NUT − GRADE 8 5) TOP ASSEMBLY
2) 5/8" SAE FLAT WASHERS 6) BASE FRAME ASSEMBLY
3) NYLON SPACER 7) ROLLER ASSEMBLY
4) 5/8-11 X 4" HEX HEAD BOLT − GRADE 5
8) Securely attach the table top surface to the top frame assembly, using the hardware supplied.
Note: When the base kit (STT) is purchased separately, install an appropriate table top
surface. This typically consists of plywood sheets cut to fit the frame dimensions, and it may
include a felt covering, to help prevent scratching of the load material. A top surface of this
type (STTTF) or a felt kit to construct such a surface using customer-supplied wood (STTTFK)
may be purchased from Wood's Powr-Grip or a distributor (see REPLACEMENT PARTS LIST).
9) Test the table as directed in MAINTENANCE: T
ESTING
S
CHEDULE
.