Belkin Gigabit Powerline HD Networking Adapter 8820-00111 F5D4076 - Manual (Page 8)

6
Gigabit Powerline HD Networking Adapter
sections
table of contents 1 2 4
CoNfIGUrATIoN
3
overview
The Adapter uses 128-bit AES encryption to block access from
the outside . By default, the protection is enabled . However, it is
recommended that you change the default network password with the
“Encryption” button located on the units .
Changing the Network Password
1. With both Adapters plugged into the wall, press the “Encryption”
button on both units for 10 seconds . The password on these
Adapters has now been changed to a random value .
2. Next, press the “Encryption” button on one unit for more than 0 .5
seconds, but less than three seconds .
3. Within two minutes, press the “Encryption” button on the second
unit for more than 0 .5 seconds, but less than three seconds .
4. The new network password has now been saved to the second
unit . The password will not be lost, even if the Adapters are
unplugged from the wall .