WORX WU381 18V 2.6 Ah Lithium Ion SDS Plus Cordless Rotary Hammer Drill - Manual (Page 3)

3
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
g) if devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and properly
used. Use of these devices can reduce dust-related hazards.
POwER TOOl USE AND cARE
a) Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools. check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. if damaged, have the
power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the
power tool for operations different from those intended could result in
a hazardous situation.
BATTERY TOOl USE AND cARE
a) Ensure the switch is in the off position before inserting battery
pack. Inserting the battery pack into power tools that have the switch
on invites accidents.
b) Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
c) Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of injury and
fire.
d) when battery pack is not in use, keep it away from other metal
objects like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or
a fire.
e) Under abusive conditions, liquid may be ejected from the
battery; avoid contact. if contact accidentally occurs, flush with
water. if liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
SERvicE
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
4
5
6