WORX WU651 300W vibrafree Rotary Sander 125mm 240V - Manual (Page 5)

5
tool for operations different from those intended could result in a
hazardous situation.
5. Service
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
If the replacement of the supply cord is necessary, this has to be
done by the manufacturer or his agent in order to avoid a safety
hazard. a
b
1
2
3
4
5
6
7
8
9
Additional safety instructions for
your sander
Harmful/toxic dusts will arise from sanding e.g. lead painted
surfaces, woods and metals. Contact with or inhalation of these
dusts can endanger the health of operator and bystanders. Always
use eye glasses and dust mask.
Hearing protection should be worn when using the sander.
Always wear safety glasses or eye shields when using the
sander. Everyday eyeglasses have only impact-resistant
lenses; they are not safety glasses. Following this rule will
reduce the risk of serious personal injury.
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Fully unwind cable drum extensions to avoid potential overheating.
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
Ensure your mains supply voltage is same as indicated on the
rating plate.
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
Always check walls, floors and ceilings to avoid hidden power