WORX WU330 710W SDS Hammer Drill 240V - Manual (Page 6)

6
Technical data
Type wU330 wU330.1 wU330.2 wU330.3 wU332 wU332.1
wU330l (330~359-designation of machinery, representative of
Rotary Hammer drill)
wU330l
wU330 wU330.1 wU330.2
wU330.3 wU332 wU332.1
Rated voltage 110V~50Hz 220-240V~50/60Hz
Rated power 710W
Rated no load speed 0-1050/min
Impact rate 0-4600bpm
Impact energy 2.7J
Protection class /II
Drilling
capacity
max
Masonry 26mm
Steel 13mm
Wood 30mm
Machine weight 2.5kg
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Noise and vibration data
When tested at hammer & drill mode L
pA
=91dB
When tested at hammer only mode according to 2000/14/EC L
pA
=90dB
When tested at hammer & drill mode L
WA
=102dB
When tested at hammer only mode according to 2000/14/EC L
WA
=105dB
K
PA
&K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
Vibration total values (triax cover sum) determined according to EN 60745:
Hammer drilling into concrete
Vibration emission value a
h,HD
=19.065m/s 2 (for
main handle)
a
h,HD
=18.143m/s 2 (for auxiliary handle)
Uncertainty K=1.5m/s²
Chiselling
a
h,CHeq
=12.2m/s 2 (for main handle)
a
h,CHeq
=10.977m/s 2 (for auxiliary handle)
Uncertainty K =1.5m/s²
warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration