X-1 (H2O Audio) S7-1A3 - Manual (Page 3)

Important Note:
Only use the lubricant provided.
Apply a small amount of the enclosed Silicon Super O-Lube on
the Tray and on the inside of the Silicone Sleeve Seal Area. This
will help maintain a watertight seal, and facilitate the opening
and closing of the housing.
CAUTION: If too many uses occur between the application of
the Super O-Lube, a watertight seal cannot be guaranteed.
Please apply a small amount of Super O-Lube at least every 5
separations of the Tray and Silicone Sleeve. For more information
please read your manual.
If you have any questions or need refills, visit our website or contact
H2O Audio Customer Support
P. 858.623.0339
E. [email protected]
h2oaudio.com
Apply Super O-Lube here