Yamato Scientific BM410 Water Baths - Manual (Page 15)

13
Operational Procedure
Pre-setting Temperature
Canceling the preset temperature
You can easily cancel the preset temperature before you push the “SET” key in procedure 3. (See
previous page) Please follow the following procedure. If you do not push the “SET” key for more than 1
minute, the display returns to the original mode.
Display after operation/Operational procedure Explanation
ex, The preset temp. selected
Example of display in case
you select the preset temp.
ex. The temperature last set
Example of display before
you select the preset temp.
If you want to cancel the preset
temp. just after you select, push both
▽and △key again for more than
one second.
The unit returns to the temp. setting
mode.
→
STOP