Yamato Scientific DN410I Inert Oven - Manual (Page 88)

38
Flowchart for programming
Segment configuration
: Segments are made up of the
following items, and must be input
in this order.
Ramp time
Time
Temperature
Ramp level
Soak time
Ramp time
Rising time
Ramp level
Target
temperature
Soak time
Time held at ramp
level
Wait function
Selects whether
to give priority to
soak time (OFF),
or to hold process
time at ramp level
(ON).
Call up the program mode.
Call up the program number that you want to
input or edit.
When you want to rewrite programs, call up
your desired segment number on the main
display.
Note that this will appear in case of editing.
Input Ramp time.
Note: When you run this unit with full power,
input
.
Input Ramp level.
Input Soak time.
Note: If there is no soak time (changing
immediately to next temperature), input
0. To hold, select
Select wait function.
The next segment will appear.
Note: To repeat, press either the key or the
key to display , and select it with
the ENTER key. Input the segment
number that you want to repeat, and
then do the repeat count.
* Input all the settings in the same way.
When finished inputting all items, select
for the ramp time, and press the
ENTER key.