3D Robotics IRIS Plus Upgrade Kit - Manual

1
Upgrade Kit Instructions
Thank you for purchasing an IRIS+ Upgrade Kit. You’re now ready to transform your IRIS into an IRIS+.
You will need:
-Phillips-head screwdriver
-2 mm hex key
-Glue for foam, preferably hot glue but Gorilla Glue or RC modeling adhesive will also work.
-Small, flat, prying tool for removing DF13 connectors.
You will reuse the screws and cables from your original IRIS, so don’t lose them during disassembly.
IRIS+ Upgrade Kit Instructions vB | ©3D Robotics, Inc. | 10 November 2014