Configuration, Specifications, Support – 3D Robotics Digital Airspeed Sensor User Manual
Page 3
Configuration
To enable the airspeed sensor, connect Pixhawk to Mission Planner (or APM Planner for
OS X), and select the Advanced Parameter List under the Configuration tab. Locate the
ARSPD_PIN parameter and set to 65. Select Write Params to apply.
For instructions on downloading software and connecting Pixhawk, visit
Specifications
»
Measurement Specialties 4525DO sensor, one psi measurement range
(roughly up to 100 m/s or 360 km/h or 223 mp/h)
»
Resolution of 0.84 Pa
»
Data delivered at 14 bits from a 24 bit delta-sigma ADC
»
M3 / 6-32 mounting holes
For customer support, contact us at
or call our support line at
+1 (858) 225-1414
Monday through Friday, from 8 am to 5 pm, PST.
Pixhawk Digital Airspeed Sensor Manual V1 | ©3D Robotics, Inc. | 11 March 2014
Support