Brother ULT2002D - Manual (Page 231)

5-56 Embroidery
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
1
Connecting Characters
Follow the steps below when all the characters in the pattern do not fit in the embroidery frame at
once.
Example: Connecting the letters “ABCDE” with “FGHI”
A B C D E F G H I
1. Enter the letters “ABCDE.”
2. Press to move the needle start position to .
3. Press to turn off automatic thread cutting.
4. Press the “Start/Stop” button to begin sewing.
5. When sewing is finished, trim the thread, leaving a long
end. Then re-insert the fabric in the embroidery frame,
in a position where you can sew the letters “FGHI.”
1 The embroidery end position