Barco ID LR-6 R9010342 - Manual (Page 86)

6. Advanced
Image 6-73
Zebra on a single color
Image 6-74
Full color image Image 6-75
Result image after color keying
The color keying function is only relevant when in presence of the Pro version, although present in the stan-
dard version.
6.5.8 Diagnostics
Diagnostics
1. See the Troubleshoot section in the appendix
6.6 Signal Menu
Overview
• Switching mode
• Background
6.6.1 Switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-
less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Tool bar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Switching mode
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired switching mode
82 R59770134 ID LR-6 27/05/2011