Belkin P73890EA-A - Manual (Page 12)

8
7. After the Card is inserted, Windows will detect “NEC
USB Open Host Controller (E13+)” and “Belkin USB 2.0
Hi-Speed Host Controller”. The required driver support
will be automatically installed. No user input is required.
8. After installation of the USB host controllers, Windows will
detect “USB Root Hub” and automatically install the
required driver support. This will repeat one more time.
9. Restart your computer to complete the
installation procedure.
Verifying Proper Installation (Windows Me)
After installation, check the Windows Device Manager to
confirm that the Card has been properly installed.
1. Right-click on “My Computer” and select “Properties”.
2. Select the “Device Manager” tab.
3. Click on the plus sign (+) next to “Universal Serial
Bus Controllers”.
The “Universal Serial Bus Controllers” list will now include two
“NEC USB Open Host Controller (E13+)” entries, one “Belkin
USB 2.0 Hi-Speed Host Controller” entry, one “USB 2.0 Root
Hub Device” entry, and two “USB Root Hub” entries.
Note: If your computer features built-in USB ports, or if you
have other USB PCI controller cards installed, you will see
additional USB Controller and root hub entries.
Installation (continued)
P73890-A_F5U222ea_man.qxd 9/30/02 3:48 PM Page 8