BMW 530XD - Manual (Page 46)

45
En
te
rt
a
in
m
e
n
t
Overvi
ew
Co
n
tr
o
ls
D
riv
in
g
h
in
ts
Na
v
iga
ti
on
Mo
bil
it
y
Re
fe
re
n
c
e
Seat, mirror and steering
wheel position memory*
You can memorise and call up two different
positions for the driver's and front passenger's
seat
* , the outside mirrors and the steering
wheel.
The lumbar support setting is not stored in the
position memory.
Memorising
1. Switch on radio readiness or the ignition,
see page
56 .
2. Select the desired seat, outside mirror and
steering wheel positions.
3. Press the button:
The LED in the button comes on.
4. Press the desired memory button 1 or 2:
The LED goes out.
Calling up
Do not call up the memory while the car is
in motion, otherwise an unexpected seat
or steering wheel movement may cause an
accident.
<
Convenience function
1. Unlock and open the driver's door or switch
on radio readiness.
2. Briefly press memory button 1 or 2 as
desired.
The positioning movement is interrupted
immediately if you briefly press a seat
adjustment switch or one of the memory
buttons.
Safety function
1. Close the driver's door and switch the igni-
tion on or off.
2. Press memory button 1 or 2 as desired until
the adjusting procedure has been com-
pleted.
If the button was pressed accidentally:
Press the button again; the LED will go out.
Request with remote control
The last driver's seat, outside mirror and steer-
ing wheel position selected is memorised in the
remote control currently in use.
You can choose when the position is called up:
> Calling up when unlocking the car
> Calling up when opening the driver's door
iDrive concept, see page 14 .
1. Call up the start menu.
2. Press the controller to call up the menu.
3. Select "Vehicle settings" and press the
controller.
4. Select "Door locks" and press the control-
ler.
5. Select "Central locking" and press the con-
troller.
6. Select "Last seat pos." and press the con-
troller.
Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG