Blaupunkt Verona C51 - Manual (Page 26)

55
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Switching Loudness
On / Off
Loudness refers to boosting the bass
and treble at low volume levels to match
the ear’s sensitivity.
➮
Press the AUD/LD button
=
for
about two seconds.
If loudness is switched on, LD shows in
the display.
Setting Loudness Intensity
The loudness boost can be set in steps
from one to six.
➮
Press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
:
until
“LOUDNESS” appears in the dis-
play.
➮
Press the or button
:
to ad-
just the boost.
➮
Press the MENU button
8
or OK
;
.
Equalizer
This device has a parametric digital
equalizer. In this case, parametric
means that in each of the five filters, one
individual frequency can be emphasised
or reduced (with a gain of +8 to -8).
The following filters are available:
●
SUB LOW EQ 32 - 50 Hz
●
LOW EQ 63 - 250 Hz
●
MID EQ 315 - 1,250 Hz
●
MID/HIGH EQ 1,600 - 6,300 Hz
●
HIGH EQ 8,000 - 12,500 Hz
These filters can be set without using
any measuring instruments. You can use
them to make a significant difference to
the properties of the sound in the vehi-
cle.
Adjustment Instructions
For the purposes of this adjustment, we
recommend you use a cassette you
know well, or a CD if a CD changer is
connected.
Before making any adjustments to the
equalizer, set the tone and volume con-
trols to zero and deactivate loudness.
For more information on this, read the
section on “Tone and volume controls”.
➮
Listen to the cassette or CD.
➮
Assess the sound you hear.
➮
Now consult the “Equalizer Adjust-
ment Guide” table for “Sound Qual-
ity”.
➮
Adjust the equalizer values as de-
scribed under “Action”.
EQUALIZER LOUDNESS