Vitek VT-1463 - Manual (Page 4)

2
3. Insert the plug into wall outlet. The blender
is ready for operation.
4. Put the attachment into the products you
intend to process and press On/Off Button
(2) (fig. C).
5. After the use, unplug the unit, turn the
attachment clockwise and remove (fig. B).
You may use the blender with the utensils
holding the prepared products.
ATTENTION: NEVER OPERATE THE
BLENDER, IF YOU ARE SIMULTANEOUSLY
PREPARING THE PRODUCT.
Intervals
Do not run the unit for more than 1 minute at
a time, then let the motor cool for about 10
minutes.
Cleaning
Unplug the unit before cleaning.
1. Remove the attachment.
2. Wash the attachment in warm, soapy
water, then rinse and allow to dry.
3. Wipe the main body of blender with damp
cloth.
Operation Tips
Discoloration of plastic parts may occur after
processing foods with strong color pigments
(carrots, beet, etc.).
Use cloth soaked in cooking oil to remove any
such spots.
Troubleshooting
If the blender does not operate:
- Make sure the plug is inserted into the wall
outlet. Check the outlet for voltage by con-
necting any other appliance.
In case of any faults, refer to the authorized
service center.
SPECIFICATIONS
Power requirements: 220-230 V ~ 50-60 Hz
Max. power: 300 W
Intervals: 1 min. operation/ 10 min. break.
The manufacturer reserves the right to
change the characteristics of the device
without prior warning.
Service life of the unit not less than 3
years
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive
89/336/EEC and to the Law
Voltage Regulation (73/23 EEC)
ENGLISH
Vt-1463.qxd 08.02.05 9:56 Page 2