Blaupunkt MALIBU C50 - Manual (Page 17)

17
ENGLISH
FRANÇAIS
ESP
AÑOL
PORTUGUÊS
Audio and volume
distribution settings
Bass settings
➮
To set the bass, press the AUD
button
=
.
“BASS” appears in the display.
➮
Press the or button
:
to
adjust the bass.
Treble settings
➮
To set the treble, press the AUD
button
=
.
“BASS” appears in the display.
➮
Press the button
:
until
“TREBLE” appears in the display.
➮
Press the or button
:
to
adjust the treble.
Balance settings
➮
To set the balance, press the AUD
button
=
.
“BASS” appears in the display.
➮
Press the button
:
until
“BALANCE” appears in the display.
➮
Press the or button
:
to
adjust the balance.
Fader settings
➮
To set the fader, press the AUD
button
=
.
“BASS” appears in the display.
➮
Press the button
:
until
“FADER” appears in the display.
➮
Press the or button
:
to
adjust the fader.
Switching loudness on/off
If loudness is activated, the bass and
treble levels are aurally compensated,
i.e. they are increased at lower volume
levels.
➮
Press the AUD (LD) button
=
for
approximately 1 second.
LD lights up in the display when loud-
ness is switched on.
Setting loudness intensity
The loudness level can be set in steps
ranging from 1 to 6.
➮
Press the MENU button
8
.
➮
Keep pressing the button
:
until “LOUDNESS” appears in the
display.
➮
Press the or button
:
to set
the level.
➮
When you have finished making
your changes, press the MENU
button
8
or OK
;
.
AUDIO SETTINGS AND VOLUME DISTRIBUTION