Brother Copier/Printer MFC-895DW - Manual (Page 44)

Chapter 5
32
To set the receive mode follow the instructions below:
a
Press Menu.
b
Press a or b to display Initial Setup.
Press Initial Setup.
c
Press a or b to display Receive Mode.
Press Receive Mode.
Note
If you cannot change the Receive Mode, make sure the Distinctive Ring feature is set to Off.
(See Distinctive Ring uu page 39.)
d
Press Fax Only, Fax/Tel, External TAD or Manual.
e
Press Stop/Exit.
The LCD will display the current receive mode in Fax mode.