Brother Copier/Printer MFC-895DW - Manual (Page 58)

Chapter 8
46
Search
8
You can search alphabetically for names you
have stored in the One Touch and Speed Dial
memories. (See Storing One Touch Dial
numbers uu page 49 and Storing Speed Dial
numbers uu page 51.)
a
Press (Address Book).
b
Press (Search) on the
Touchscreen.
c
Press the first few letters of the name on
the Touchscreen.
Press OK.
d
Press a or b to scroll until you find the
name you are looking for.
Press the name you are looking for.
e
Press Send a fax or
Send a E-mail
.
f
Press Start.
Note
• If the LCD shows
Results cannot be found.
. when
you enter the first few letters of the name,
it means that a name for the letter is not
stored.
• One Touch Dial number and Speed Dial
numbers stored without the name cannot
be retrieved by the Search function.
LDAP search
8
If the machine is connected to your LDAP
server, you can search for information such
as fax numbers and E-mail addresses from
your server. (See How to set up LDAP
uu
Network User’s Guide)
Fax redial
8
If you are sending a fax manually and the line
is busy, press Hook and then Redial/Pause,
wait for the other fax machine to answer, and
then press Start to try again. If you want to
make a second call to the last number dialed,
you can save time by pressing Redial/Pause
and Start.
Redial/Pause only works if you dialed from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.