Brother Copier/Printer MFC-895DW - Manual (Page 88)

76
Replace Parts
Drum Unit
A
The drum unit has exceeded its rated life.
Please replace the drum unit with a new one.
We recommend a genuine Brother drum unit
be installed at this time.
After replacement, reset the drum counter by
following the instructions included with the
new drum unit. (See Resetting the drum
counter uu page 80.)
Drum Stop
A
We cannot guarantee the print quality. Please
replace the drum unit with a new one. We
recommend a genuine Brother drum unit be
installed at this time.
After replacement, reset the drum counter by
following the instructions included with the
new drum unit. (See Resetting the drum
counter uu page 80.)
Replacing the drum unit
A
Important
• While removing the drum unit, handle it
carefully because it may contain toner. If
toner scatters on your hands or clothes,
wipe or wash it off with cold water at once.
• Every time you replace the drum unit,
clean the inside of the machine.
(See Advanced User's Guide: Cleaning
and checking the machine).)
• Wait to unpack the new drum unit
immediately before you put it in the
machine. Exposure to direct sunlight or
room light may damage the drum unit.
a
Leave the machine turned on for
10 minutes for the internal fan to cool
the extremely hot parts inside the
machine.
b
Press the front cover release button and
then open the front cover.