Belkin F5D4081 User Manual
Page 8
6
Share Powerline AV 3 Port
sections
table of contents
1
2
4
3
ConfIgUrATIon
overview
The Adapter uses 128-bit AES encryption to block access from
the outside . By default, the protection is enabled . However, it is
recommended that you change the default network password with the
“Encryption” button located on the units .
Changing the network Password
1. With both Adapters plugged into the wall, press the “Encryption”
button on both units for 10 seconds . The password on these
Adapters has now been changed to a random value .
2. Next, press the “Encryption” button on one unit for approximately
one to three seconds . The units will change the password in a
maximum wait time of two minutes .
3.
Next, press the “Encryption” button on the second unit for
approximately one to three seconds . The units will change the
password in a maximum wait time of two minutes .
4. The new network password has now been saved to the second
unit . The password will not be lost, even if the Adapters are
unplugged from the wall .