Brother Direct Drive Programmable electonic pattern sewer with cylinder bed BAS-311G - Manual (Page 2)

When thickness of material has been changed, the height of the
stepping presser foot is changed so that a fixed amount of
presser foot moving is constantly provided. This prevents the
stepping presser foot from lifting too much or being excessively
pressed and thus uniform thread tightness can be obtained.
The height of the stepping presser foot can be set with no tools
required, simply by entering a numeric value from the operation
panel or in a program.
Furthermore, you can use user programs to set the stepping
presser foot height to the desired height separately for each
sewing program.
Presser foot control mechanism always provides uniform thread tightness
Since the data is resolved at 0.05 mm per pulse for the feed, slanted lines and curves are accurately
sewn with beautiful finishes. Also, a simple single point embroidery motif can be sewn, and embroidering
on heavy materials, which is not easy with a general embroidery machine, is also possible.
Smooth and beautiful stitches can be produced with a minimum resolution of 0.05 mm
With the adoption of a Brother's unique direct drive motor,
starting and stopping is quick. Machine time has been reduced
by approximately 19% compared to the previous model and thus
productivity is increased.
Productivity is increased with maximum sewing speed of 2,700 rpm
The direct drive mechanism greatly reduces power transmission
losses, and a compact and energy-efficient motor has also been
adopted. These innovations result in energy savings of
approximately 50% from previous models. This is a
programmable electronic pattern sewer with the lowest power
consumption in the market.
Economical operation with low power consumption
Machine time
0
5
(Sec.)
BAS-311F
(2,500rpm)
BAS-311G
(2,700rpm)
-19%
Sewing rectangle pattern, 60x99mm
(No.of stitches:106, stitch length:3mm)
Sewing rectangle pattern, 60x99mm
(No. of stitches: 106, stitch length: 3mm,
sewing speed: 2,500 rpm, sewing 504 pieces/hour)
Power consumption
0
100
200
300
400
(Wh)
BAS-311F BAS-311G
-50%