Barco R9010010 - Manual (Page 128)

A. Cleaning the dust filters
A.2 Dust filter on the back side
Necessary tools
• Flat screwdriver
• Philips screwdriver
What should be done
To get access to the dust filters, the back cover must be removed.
How to remove
1. Loosen the 3 screw on the back side. (image A-6)
2. Take off the cover.
3. Turn out 2 times 4 screws to remove both dust filters on the back side of the cover. (image A-7)
4. Take out the dust filters.
5. Turn out the 4 screw on the bottom side and take out the dust filter. (image A-8)
Image A-6
Back cover removal
124 R5976563 BARCOR10 SLM 20/10/2004