Blaupunkt Arizona DJ70 - Manual (Page 21)

48
Fast rewind
➮
Press the button,
7
.
“REWIND” appears in the display.
Stopping the tape
➮
Press the OK button,
5
, or the tape
run button,
7
, on the other side.
Play continues.
Note:
While the tape is being fast wound, it is pos-
sible to hear the radio station that was most
recently tuned in. This requires the “Radio
monitor” function to be switched on.
Switching the radio monitor on
and off
➮
Press the softkey,
4
, indicating “RM”.
When the radio monitor is switched on, “RM”
is displayed with light and shade reversed.
The current state, i.e. “RM ON” or “RM OFF”,
is shown briefly on the display when switch-
ing.
Skipping blank tape
It is possible automatically to skip sections of
blank tape that are more than ten seconds
long. This requires the blank skip function to
be activated.
Switching blank skip on and off
➮
Press the softkey,
4
, indicating “BLS”.
When the blank skipping is switched on, “BLS”
is displayed with light and shade reversed.
The current state, i.e. “BLS ON” or “BLS OFF”,
is shown briefly on the display when switch-
ing.
Selecting chrome/metal tape
There is a facility for setting the type of tape
in the inserted cassette. We recommend that
you always set the type of the inserted tape
in order to obtain the best replay quality.
➮
Press the MENU button,
8
.
➮
Press the or button,
7
, until “CC
TAPE” appears in the display.
➮
Adjust the tape time with the and
buttons,
7
.
For chrome and metal tape select the setting
“MTL ON”, and select “MTL OFF” for Fe tape.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
Dolby* B noise suppression
You should switch on the Dolby function when-
ever you are playing tapes recorded with the
aid of the Dolby B process.
➮
Press the softkey,
4
, indicating “ ”.
When the Dolby function is switched on, “ ”
is displayed with light and shade reversed.
* Noise suppression system manufactured under
licence from Dolby Laboratories. The word Dolby
and the double-D symbol are trademarks of Dolby
Laboratories.
Traffic information with cassette
operation
The “TA” function, which gives priority to traf-
fic announcements, enables your radio to re-
ceive traffic announcements even when play-
ing cassette tapes. When a traffic announce-
ment comes, the cassette play is stopped and
the traffic announcement is played. For more
information, read the section on “Traffic Infor-
mation”.
CASSETTE OPERATION