Bosch 4100DG-09 - Manual (Page 35)

87 Toll Free: 877-BOSCH-99 Boschtools.com
Demolition for Wood with Nails
Tip designed for
plunge cutting in
demolition and
remodeling work
Reinforced tooth design handles
tough wood with nails applications
Taper back for easier starts in
tough-to-reach applications
Extra thick body (.062) and 7/8” body height for
maximum control, less vibration and straighter cuts
Variable gullet depth for
faster chip removal and
smoother cuts.
5º tilt angle for faster
cuts and longer life
5/8 Variable tooth pitch
for optimal speed and
cleanliness of cut
Standard Use for Metal
18TPI and 0° hook
angle create clean cuts
Flexible, thin blade body (.035),
3/4" body height -for resistance
to breaking or shattering
5° tilt angle for faster cuts
Bi-Metal composition
for longer life
Tooth Geometry
Two teeth facing left
Two teeth facing right
Pair-setting optimized
for fast cuts and long
life in metal
Progressor® Patented Tooth Design
The Progressor® name comes from the progressive tooth pattern that graduates from high to low teeth per inch over the length of the
blade. The progressive tooth pattern is engineered so the blade can cut both thick and thin material cleanly and smoothly. Progressor®
blades are ideal for switching from one material thickness to another, eliminating the need for blade changes and saving time on the
job. Available for wood, metal or all-purpose use.
Tip designed for
easy plunge cuts
Taper back for easier starts
in less accessible locations
Bi-Metal blade for long life.
Available in 6" and 8" lengths
THICK MATERIAL
Large teeth
THIN MATERIAL
Small teeth
BOSCH Patented
Progressor® Blades
also available for wood
and metal cutting:
• RPRW8 For Wood
• RPRM6 For Metal
• Demolition blades
for metal
Also Available
Tooth geometry (pair
setting) optimized for
metal cutting
The Progressive tooth
pattern allows one
all-purpose blade to
cut through THICK
and THIN materials
Reciprocating
Saw Blades