Troubleshooting guide, Locating the circuit breaker on your treadmill – Bowflex Treadmills 5 Series User Manual

Page 33

Advertising
background image

Troubleshooting Guide

PROBLEM

CAUSE

CORRECTION

Treadmill will not start

Not plugged in

Plug into three prong grounded outlet.

Safety pull pin not inserted.

Insert safety pull pin.

Treadmill circuit breaker tripped.

Reset circuit breaker.

Elevation not accurate

Out of calibration.

Recalibrate unit.

Speed not accurate

Out of calibration.

Recalibrate unit.

Set in wrong units.

Change units.

Walking belt slips

Walking belt loose.

Adjust walking belt tension. (See page 26)

Walking belt not centered

Walking belt tension not centered
across the rear roller.

Adjust walking belt tension. (See page 26)

Heart rate not displayed

(using chest strap)

Transmitter not making good contact

with skin.

Moisten skin contact area on the chest strap, or
turn chest strap upside down.

Electromagnetic interference.

Turn off any television, microwave or computer

within 6 feet (2 meters) of treadmill.

Treadmill squeaks

Pivot points need lubrication.

Lubricate pivot points.

Locating The Circuit Breaker On Your Treadmill:

The breaker is near the front of the treadmill and near the power cord.

33

Warranty

Advertising
This manual is related to the following products: