Boss Audio Systems BV7320 User Manual
Page 13
4. Basic Disc, USB or MMC/SD Operation
4.1 Begin playback
1.
2. Press the RELEASE button to
3. Insert a disc into the DISC SLOT(Label surface up), then flip up the
front panel till hearing a clip.
?
Common Question
Q: There is nothing displayed on the monitor when the DVD player is
turned on. How to solve this problem?
A: Ensure that the monitor was set to right video input(not TV channel); for
example, if you make VIDEO1 INPUT of the monitor and DVD player
connected
with each other, then you need
to VIDEO1.
Connect the video output of this unit to the video input of the external
monitor, and select the right video input on the menu of the external
monitor.
to set the monitor input
Discs that are scratched, poorly manufactured or recorded in low quality,
may not play.
Remark:
1) In addition to normal CD and DVD, this unit supports to play CD-R,
CD-R/W, DVD-R and DVD-R/W as well; however, depending on the
conditions of the recording equipment, recording program or the disc
itself, some CD-R, CD-R/W, DVD-R or DVD-R/W may not play.
2) When dealing with CD-R, CD-R/W, DVD-R or DVD-R/W recording,
too high speed recording may result in poor signal quality and therefore,
we recommend selecting the lowest recording speed as possible.
To connect an external monitor to this unit.
drop down the front panel.
! NOTE
1.
2. If the player cannot read disc under normal condition, please try to
eject and reload the disc again.
3.
During slow forward, press the PLAY button to resume normal playback.
This function is only for video.
5
If the unit is currently playing DVD/VCD disc, press the STEP button
consecutively to display the still frame forward with step by step.
Press the PLAY button to resume normal playback.
5
5
1.
In the mode of DVD disc playback:
Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL
or REP OFF.
2.
In the mode of VCD(PBC OFF)/CD disc playback:
press the RPT button to select REP ONE, REP ALL or OFF.
When it is in the state of PBC ON, during VCD disc playing, the RPT
button are not available.
3.
In the mode of MP3/WMA disc playback:
Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.
5
Press the
button if you want to repeat a specific segment on a disc
that you define:
1.
Press the
button at a point (A) where you want it to be the start point
of the repeat segment. Press the
button again at a point (B) where you
want it to be the terminal point of the repeat segment. Then it will play the
segment repeatedly.
2.
To cancel the A-B repeat mode and resume normal playback, press the
button for the third time.
.3 Playback with still frame
.4 Playback Repeatedly
.4.1 ONE/ALL Repeat
.4.2 A-B Repeat
A-B
A-B
A-B
A-B
Note:
During VCD/MP3/WMA/CD playback, points A and B must be within the
same track.
During DVD playback, points A and B can be selected from different chapters.
PDF created with FinePrint pdfFactory trial version