Setting up – Bose Acoustimass 16 User Manual

Page 9

Advertising
background image

9

Setting Up

1.

Connect the wire pair marked

CENTER

to the center cube speaker array. Press the termi-

nal tab on the back of the cube speaker array. Insert the marked (+) wire into the red ter-
minal and the plain (–) wire into the black terminal. Release the tab to secure the wires.

2.

Connect the wire pair marked

RIGHT

to the right front cube speaker array (to the right of

the TV as you face it).

3.

Connect the wire pair marked

LEFT

to the left front cube speaker array.

4.

Plug the other end of each cable into the

CENTER FRONT

,

RIGHT FRONT

, and

LEFT

FRONT

blue RCA jacks, respectively, on the Acoustimass

®

module.

Connecting rear cube speaker arrays to the Acoustimass module

Each rear cube speaker array is connected to the Acoustimass module with a 50-foot (15m)
speaker cable (Figure 5). Be sure to match the correct cable with the corresponding speaker
location. Rear speaker cables have orange RCA connectors at one end with

LR

(left rear),

RR

(right rear), or

CR

(center rear) molded into the connectors. The other ends of the cables have

two wires. The red collars on the + wires are labeled

LEFT REAR

,

RIGHT REAR

, or

CENTER

REAR

.

1.

Connect the wire pair marked

RIGHT REAR

to the right rear cube speaker array (on your

right as you face the TV). Press the terminal tab on the back of the cube speaker array.
Insert the marked wire into the red terminal and the plain wire into the black terminal.
Release the tab to secure the wires.

2.

Connect the wire pair marked

LEFT REAR

to the left rear cube speaker array.

3.

If you have a center rear cube speaker array

(Acoustimass 16 system or upgraded Acous-

timass 15 Series II system), connect the wire pair marked

CENTER REAR

to the center

rear cube speaker array.

Note:

The Acoustimass 15 Series II system may be upgraded by adding a center rear cube

speaker array. See “Upgrading your Acoustimass 15 Series II speaker system” on page 12.

4.

Plug the other end of each cable into the

RIGHT REAR

,

LEFT REAR

, and

CENTER

REAR

orange RCA jacks, respectively, on the Acoustimass module.

AM264924_00 _V.pdf • August 13, 2002

Advertising