Appendix, Continued) – Belkin BITRONICS P73046 User Manual
Page 35
31
Appendix
(continued)
Steps for IBM Aptiva 2176-C33, IBM BIOS v BSTUS4B
NOTE: The steps for this computer are not included in the document received in the box.
1.
While the computer is booting, follow the directions on the screen: Press F1 to
enter Setup.
2.
Follow the legend on how to scroll through the Setup options until you reach
Input/Output Ports.
3.
Select Parallel Port Mode.
4.
Select ECP.
5.
Press ESC twice.
6.
Press ENTER to save the setting and exit Setup.
Micron
General Steps
1
While the computer is booting, follow the directions on the screen: Press F2 to
enter Setup.
2.
Select Advanced from the menu bar.
3.
Follow the legend directions to select Integrated Peripherals.
4.
Use the arrow-down key to select LPT Mode.
5.
Select the parallel port mode with the highest performance (e.g. ECP).
6.
Follow the legend directions to save the setting and exit Setup.
Steps for the Millennium, Phoenix BIOS v 4.05
NOTE: The steps for this computer are not included in the document received in the box.
1.
While the computer is booting, follow the directions on the screen: Press F2 to
enter Setup.
2.
Go to Connectivity.
3.
Change Port from AT to ECP.
4. Select
PS/2.
Packard Bell
General Steps
1
While the computer is booting, follow the directions on the screen: Press F2 to
Enter Setup. (It might be F1 on some models.)
2.
Select Advanced from the menu bar.
3.
Follow the legend directions to select Integrated Peripherals (or Peripheral
Configuration on some models).
4.
Choose the parallel port mode with the highest performance (e.g. ECP).
5.
Follow the legend directions to save the setting and exit Setup.
Steps for the Force 443 CD, AMBIOS BIOS v 1.00.12.1313oe
1
While the computer is booting, follow the directions on the screen: Press F1 to
Enter Setup.
2.
Select Advanced from the menu bar.
3.
Use the down-arrow key to select Peripheral Config and then press ENTER.
4.
Use the down-arrow key to select Parallel Port Mode and then press ENTER.
5.
Use the down-arrow key to select Extended (originally Compatible) and then
press ENTER.
6.
Press F10 to save the setting.
En
P73046_F1U128uKIT univ_man.qxd 4/28/00 2:12 PM Page 31