Belkin P74279ea - Manual (Page 9)

9
Software Installation
A step-by-step guide to getting your mouse set up.
Important: Before installing the MiniScroller ™ software, it is strongly recommended that you
remove all other third party mouse drivers. DO NOT REMOVE THE WINDOWS ® DEFAULT
MOUSE DRIVERS.
WARNING: To avoid damage, turn your computer off before plugging or unplugging any
pointing devices.
Windows ® 95, Windows ® 98 and Windows NT ® Installation
a. Insert the MiniScroller ™ diskette in the A: or B: drive
b. Click "Start" in the lower left corner of your screen
c. Then click "Run"
d. Type "A\:setup" (or "B\:setup") and then click "OK"
e. Follow the on-screen instructions to complete the installation of the MiniScroller ™
f. To make the process run smoothly:
1. Click "Next" two times
2. Type in your name and the company's name,
then click "Next"
3. Click "Next" two more times
4. Specify if you are using a USB or PS/2 connection
(refer to section 2.1) then click "OK"
5. Select "Yes, I want to restart my computer now" then click "Finish"
En
P74279ea-F8E841eaBLK 24-03-2003 14:11 Page 9