AJA Ki Pro - Manual (Page 2)

2
To make inserting the media as easy as possible, you might want to first line up the media
with both hands so that the media will slide along the guides inside the Ki Pro, and then use
both thumbs to guide the media into place. You will hear a clicking of the clutch that holds
the media in place when it is fully inserted.
With the media inserted, position Ki Pro near the camera or mount Ki Pro to a camera with
the optional Exoskeleton.
Caution!
Failure to properly mount or dismount media, or an unexpected loss of power
while recording, can result in an unrecoverable data loss.
If you are using the Ki Pro without the Exoskeleton, place it on a stable surface like a table
top or professional a/v cart.
Note: Although Ki Pro comes standard with a removable 250GB HDD Storage Module, an
optional SSD Storage Module is also available. The Ki Pro Solid State Storage Module
(SSD) is recommended for mobile environments where shock-proof sturdiness may be
needed.
If you are using the Ki Pro with the Exoskeleton and a tripod, first mount the tripod plate to
the bottom of the Exoskeleton, then mount the Exoskeleton to the tripod with the locking
knob for the sliding baseplate faced toward the rear.