Network pane and network configuration screen, Ip address type – AJA FS1-X Manual User Manual
Page 93
FS1-X v1.1
www.aja.com
93
•
“Video Output Screen” on page 103
•
“Audio Proc Screen” on page 104
•
“Audio Output Screen” on page 105
•
•
Network Pane and Network Configuration Screen
The Network pane on the right side of any screen lists the FS1-X systems that appear on
the network. This pane includes three additional controls:
• Hover the cursor over any system name to see its IP address.
• Right-click any system and select Identify to blink the system ID LEDs.
• Click the gear-shaped icon in the Network pane (or select Network from the Menu list on
the left side of the screen) to open the Network Configuration screen listing FS1-X
network settings.
The Network Configuration screen allows you to view and change your FS1-X's network
settings and then click Apply to activate them.
See
for detailed setup instructions for connecting the FS1-X to a
network. Consult your network administrator about how to configure network settings.
IP Address Type
IP Address Type determines the type of TCP/IP network configuration used by the FS1-X.
DHCP enables the FS1-X to connect to the network DHCP server, which assigns the IP
Address, Netmask, and Gateway automatically. Static lets you set these parameters
manually.
Click the
Network
gear icon