AJA HD10C2 - Manual (Page 9)

HD10C2 Mini-Converter v1.0r2 www.aja.com 9
Appendix A: Specifications
Formats • 1080i @ 50/59.94/60 Hz
• 1080p sf @ 23.98/24/25/29.97/30 Hz (displayed as interlaced)
• 1035i @ 59.94/60 Hz
• 720p @ 59.94/60 Hz
• 525i @ 59.94 Hz
• 625i @ 50 Hz
Input Selection Automatic
Video Input HD-SDI/SDI, SMPTE-259/292/296
Input Equalization 100/300 meter 1694 cable (SD/HD)
SDI Outputs HD-SDI/SDI, active input loop, equalizing
Video Output: HD:YPbPr, RGB
SD: YPbPr, RGB (component mode)
Composite/YC (composite mode)
D/A converters: 12 bits
Sync Bi-level, Tri-level, H/V drive
2T K factor < 1% (Y)
Frequency Response • Y +/ -.5db to 30 MHz
• C +/- .25db to 15 MHz
Y/C delay < 2 ns
Power Uses AJA Power Supply model DWP-U-R1 (included)
• 100-240V, 50/60Hz Universal Input
• +5V DC regulated, 7.5 watt capacity
Size 147 x 79 x 25 mm
NOTE: Most VGA monitors are not compatible with a Horizontal scan rate below 30 Khz (including
the SONY GDM-W900, a popular HD monitor). The Sony 20L5 and 14L5 are compatible with
all formats supported on the HD10C2.
Table 2. Horizontal Scan Rates
Format H ScanRate
1080i 59.94 / 60 Hz 33.75 Khz
1080i 50 28.125 Khz (see note below)
1080p sf 23.98 / 24 Hz 27.000 Khz (see note below)
720p 59.94 / 60 Hz 45.000 Khz