AJA HD10AM - Manual (Page 6)

HD10AM Mini-Converter v1.0r2 www.aja.com 6
HD10AM I/O Connections
User Controls
The HD10AM has an 8-switch DIP accessible through a cut-out in the bottom of the unit.
The DIP switches are used to configure the unit’s audio embedding and disembedding,
and control ancillary data.
Factory default switch settings are all in the leftmost position.
The exact functions of the DIP switches are described in “Operation” on page 9 .
Configuration
Determined by
DIP switch on
other side of
Converter
AES I/O
+ 5 to 18VDC
Power
Input
HD/SD-SDI Input
HD/SD-SDI
HD/SD-SDI
Output 1
Output 2
BNC
BNC
BNC
D-connector
(attaches to
supplied cable)
Cable
Not Shown
To Scale
1 2 3 4 5 6 7 8
DIP Switch Setting
LEFT RIGHT