AJA R20CE - Manual (Page 3)

1
3 AJA R20CE 10-bit Encoder User Manual
Introduction
The AJA Video R20CE SDI to Analog Video Encoder produces high quality NTSC
or PAL 10-bit encoded video from SMPTE 259M SDI inputs. Three additional
analog outputs can be configured as duplicates of the composite output, or
used for component output. When configured for component video, the R20CE
can output Y/C (S-Video), YPbPr (SMPTE, EBU-N10), Betacam, or RGB.
The R20CE also serves as an SDI distribution amplifier, providing 2 re-clocked
outputs of the SDI input source. The R20CE is compatible with the AJA FR1 1RU
4 slot frame or the FR2 2RU 10 slot frame.
The component and composite outputs incorporate optimum chroma filtering
and independent pedestal configuration. The R20CE also features an exclusive
PLL jitter filter/memory to reduce the effects of SDI jitter on the output analog
video. This feature, along with the precision 4x oversampled D/A filters,
provides high quality analog outputs, with very low phase noise in the
composite outputs.
The optional AJA model FSG (Frame Sync/Genlock) Module allows genlock to
an external reference with full timing adjustment. Without the FSG Module, the
reference input provides color frame timing.
Features
R20CE Card Module, Side View
• High quality 10-bit encoding, 4 times oversampling
• SDI Input, SMPTE 259M
• Two SDI outputs (SMPTE 259M) (equalized and re-clocked copies of the
SDI input)
• Four analog outputs (configurable as 4 composite, or 1 composite and R/
G/B, Y/Pb/Pr, or Y/C)
• Y/Pb/Pr selectable for SMPTE/EBU levels or Betacam levels (Y, R-Y, B-Y)
• Automatic NTSC/PAL selection
• Configurable pedestal and narrow/wide H/V blanking
• Frame Sync/Genlock option with reference input and full timing
adjustment~
• Locks composite output Color Framing sequence to external reference
without Frame Sync/Genlock option,.
• Plug compatible with several other manufacturers' video frames
• Compatible with Leitch 6800 Series Frames
User
Controls
Timing
Adjustment