Edit-to-tape tab – AJA Control Room User Manual
Page 18
AJA Control Room v1.0
www.aja.com
18
Edit-To-Tape Tab
Using the Edit-To-Tape tab you can output your current clip to a tape deck or recording
device using remote control. A tape deck connected via RS422 and set in remote control
mode allows AJA Control Room to send an Insert Editor Assemble Edit with timecode
VTR IN and VTR OUT or Duration designated.
IMPORTANT:
Remember to verify that your AJA edit device frame buffer and output is set (via the AJA
Control Panel) for the expected video format and no unexpected conversions are taking
place. In AJA Control Room you can go to File>AJA Control Panel to open the control
panel (see
Figure 20. Edit-To-Tape Tab
Edit-To-Tape Dashboard:
The dashboard for Edit-To-Tape provides the same functions as describe for Capture
mode.