Audio DX2040 - Manual (Page 3)

TxRx
Rx
Tx
BAtt
2.7 v
H
•
Align the front of the Switch iR with the infra-red port on
the receiver and press OK. The display will show the DC
voltage:
TxRx
Rx
Tx
BAtt
2.7 v
H
If the associated transmitter is on while the DC status
is being checked the display will alternate between the
receiver’s DC status and the received transmitter DC
status. For example:
TxRx
Rx
Tx
BAtt
2.7 v
H
The transmitter status is shown as one of the following
options:
External powering
Audio Ltd has a large selection of cables available for a
variety of different applications. If the DX2040 receiver is
to be externally powered, ensure that the appropriate cable
is used.
Technical specification
User Guide DX2040 True Diversity Receiver
Frequency range 470MHz–1000MHz
Number of frequencies 32 pre-programmed
Switching bandwidth Up to 24MHz
Sensitivity -98dBm for 40dB SINAD
Balanced output level -25dBu
Frequency response 50Hz to 18kHz ±1dB
THD <0.2% typical
Batteries 2 x 1.5V AA (LR6) type
Battery life > 4 hours on good alkaline batteries
Size 147 x 64 x 20mm
Weight 250g
Operating temperature range -20°C to +55°C
Compliant to ETS 300422 EN 300445(CE) FCC
OPTION DESCRIPTION
H (high) Indicates good.
L (low) Indicates low. Replace as soon
as possible.
F (failed) Transmitter will not function
correctly.
For further information contact Audio Ltd or your local distributor
www.audioltd.com