Care and handling advice – Autocue MSP17 Master Series Prompter User Manual
Page 31
www.qtv.com
27
www.autocue.com
Issue
#
: 081
016
©
2003
-200
8
Au
to
cu
e Grou
p Ltd
Section 7: Troubleshooting and Maintenance
Maintenance
Care and handling advice
MSP17
Assembly and Installation
Guide
7.2.2: Care and handling advice
•
Avoid dropping the prompter display unit or any of its individual
components.
•
Clean the monitor periodically.
N
OTE
:
Do not use abrasive cleaners or dusters when cleaning the
monitor.
•
Do not run the prompter for excessively long periods of time.
This will cause the operation of the backlight panel to
deteriorate, gradually becoming dimmer.
•
Do not use in wet weather without a cover.
•
Do not expose to sunlight for long periods of time.
•
Adjust the mounting bracket to allow clear space between the
glass of the hood and the fully-extended camera lens
- small vibrations may cause scratches
- contact by the lens may break the glass
•
Ensure that the prompter display unit is correctly aligned both
horizontally and vertically with the camera
•
Ensure that the whole on camera unit is securely fastened and
does not sway from side to side.