Components, Assembly – Autocue Heavy Video Tripod User Manual
Page 2
Components
A
Leg locking knobs
B
Head
C
Spreader
D
Bag
E
Hot shoe
F
Pan bars
G
Pan bar clamp
H
Hot shoe locking
knob
I
Pan lock
A
A
B
C
D
E
F
Assembly
1. Before opening the tripod,
release all three locking knobs
and lift up the tripod to the
desired height. Relock the legs
and open the tripod.
5. To remove the hot
shoe loosen the hot
shoe locking knob so
that the hot shoe
moves freely.
6. Turn the safety lock
anti- clockwise to
allow the hot shoe to
slide free.
7. Attach the hot
shoe to a camera or
prompter and place
back on the tripod
head.
8. There is a choice of
1/4” or 3/8” BSW
camera fixings.
4. Lock the
head by using
the tilt (
A
) and
pan (
B
) locks.
A
B
2. Level the head by
loosening the knob
(
A
) under the head.
3. Fit pan bars by placing
them in the clamp and
securing them with the
bolt (
A
)
A
G
H
9. Adjust the spreader so that the legs are at
the desired angle by loosening the spreader
adjustment knob and then retighten it.
I
autocue.com
A